As of tonight, my bandsaw lives at the metalab, under the CNC mill, next to a table saw. The thing runs, but defintely needs some maintenance and adjustment before we can use it. I also haven't checked the state of the blade, but that can be easily sharpened with a dremel rotary tool. I tried tracking down the company (Bergin) that sold it in this region but found nothing. However I was able to find the company (`J&T Machinery Co`_) that at least makes them (model `BS-614`_) and exports them from taiwan. I also found several companies that sold them in the UK: - Warco sold the bandsaw as warco 314 bandsaw - Nu Tool 0134A bandsaw - Clarke International imports and sells them as the `Clarke CBS355 bandsaw`_ And according to some forums, and the Clarke manuals, Clarke seems to also sell spare parts which are documented in their manual. After checking the manual some accessories are missing that should not hinder us from using the bandsaw, as a saw. Apart from the saw band, this bandsaw can be used as a sander, using the sanding disk on one of the wheels and/or the saw can be replaced with a sanding belt, but I'm missing the sanding belt table attachment, and the disk sander table attachment. I am also missing the mitre table guide (I only have the rip fence). That's my overview of the current state. My next goal would be adjusting the saw (I just found the manual and it's documented), and try a cut with it. I also contacted the company in taiwan to ask about the parts, and see if I can't find a parts source closer then the UK. Joe .. _J&T Machinery Co: http://www.jtmachinery.com/index.php .. _BS-614: http://www.jtmachinery.com/product_detail.php?article_ID=149&article_CID=31 .. _Clarke CBS355 bandsaw: http://www.clarkeservice.co.uk/manuals/woodworker/cbs355.pdf