[Metalab] MSP430 halp! ?

[overflo]

hat hier jemand erfahrungen mit MSP430?
ich wuerd gern einen MSP430G2452 flashen.

> mspdebug  rf2500

MSPDebug version 0.23 - debugging tool for MSP430 MCUs
Copyright (C) 2009-2015 Daniel Beer <dlbeer at gmail.com>
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Chip info database from MSP430.dll v3.3.1.4 Copyright (C) 2013 TI, Inc.

Trying to open interface 1 on 031
Initializing FET...
fet: FET returned error code 4 (Could not find device or device not
supported)
fet: open failed
Trying again...
Initializing FET...
FET protocol version is 30394216
Set Vcc: 3000 mV
Configured for Spy-Bi-Wire
Sending reset...
rf2500: can't receive data: Operation timed out
warning: fet: reset failed
fet: FET returned error code 4 (Could not find device or device not
supported)
fet: command C_IDENT1 failed
Using Olimex identification procedure
fet: no such device: MSP430G2452
fet: identify failed





das selbe mit dem stock IC MSP430G2553 (am exakt selben wiring)
funktioniert.


> mspdebug  rf2500

MSPDebug version 0.23 - debugging tool for MSP430 MCUs
Copyright (C) 2009-2015 Daniel Beer <dlbeer at gmail.com>
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Chip info database from MSP430.dll v3.3.1.4 Copyright (C) 2013 TI, Inc.

Trying to open interface 1 on 007
Initializing FET...
FET protocol version is 30394216
Set Vcc: 3000 mV
Configured for Spy-Bi-Wire
Device ID: 0x2553
  Code start address: 0xc000
  Code size         : 16384 byte = 16 kb
  RAM  start address: 0x200
  RAM  end   address: 0x3ff
  RAM  size         : 512 byte = 0 kb
Device: MSP430G2xx3
Number of breakpoints: 2
fet: FET returned NAK
warning: device does not support power profiling
Chip ID data:
  ver_id:         5325
  ver_sub_id:     0000
  revision:       00
  fab:            60
  self:           0000
  config:         00
Device: MSP430G2xx3


-----------

der chip ist richtig verkabelt (100 mal durchgemessen), es kann nur
irgendein softwareproblem sein.

google hat mir nicht geholfen bisher.

any hints?




:*
-flo